Vertical Machining Centres (VMC)
Makino Slim3 Vertical Machining Centre with 4th Axis (2008)
- Year 2008
- Control Fanuc 0i-MC
- Travel 500 / 400 / 400 mm
- Home
- Machines
- Vertical Machining Centres (VMC)
- Haas VF-2 Vertical Machining Centre with 4th Axis (2012)
SoldVertical Machining Centre
Haas VF-2 Vertical Machining Centre with 4th Axis (2012)
A popular 3+1-axis VMC for job shops: brackets, housings and indexed milling work.
This machine has been sold. Tell us what you need and we will look for a similar one. Find a similar machine
- Year2012
- ControlHaas
- Travel700 / 500 / 500 mm
- Spindle10,000 rpm
- See it running – video walk-around, visit or test cut on request
- Help with dismantling, transport and re-installation
- Installation, commissioning and operator training available
Specifications
| Specification | Details |
|---|---|
| Make | Haas |
| Year of manufacture | 2012 |
| Control | Haas |
| 4th axis | Yes, with 200 mm chuck |
| Travel X / Y / Z | 700 / 500 / 500 mm |
| Spindle speed | 10,000 rpm |
| Taper | BT-40 |
| Tool changer | Arm type, 25 pockets |
| Guideways | LM guides on all three axes |
Is a vertical machining centre right for your part?
3-, 4- and 5-axis VMCs for prismatic parts, dies, moulds, housings and brackets.
Size a VMC from your largest part plus fixture (X/Y/Z travel and table), choose BT-40 for general work, BT-50 for heavy cuts or HSK and high rpm for finishing, and count the tools in your longest program.
Send your part drawing, material and monthly quantity, and we will confirm whether this machine fits – or suggest one that fits better.
Questions buyers ask
Can I see this machine running before I buy?
Yes. Ask for a video walk-around under power, a visit, or a test cut where the seller allows it. We also help check the spindle, ways, backlash and control history.
What size VMC do I need?
Your largest part plus fixture and tool clearance in X, Y and Z, with table size and load to match. A 20–25% margin covers most future work.
Which control is best on a VMC?
Fanuc, Siemens and Mitsubishi are all proven. Choose the one your programmers and service partners know best.
Do I need a 4th axis?
If you machine several faces or hole patterns around a part, a 4th-axis rotary table saves setups. True 5-axis is needed for blades, impellers and complex moulds.
Is the price negotiable and what is included?
The quote lists the price, the accessories included and the location. Transport, dismantling and installation can be added on request.
Similar machines
Vertical Machining Centres (VMC)
430 V Vertical Machining Centre
- Travel 400 / 300 / 400 mm
- Table 650 × 300 mm
- Taper BT-40
Vertical Machining Centres (VMC)
MCV300 Vertical Machining Centre
- Table 650 × 350 mm
- Travel 400 / 350 / 320 mm
- Taper 7/24 No. 40
Vertical Machining Centres (VMC)
MCV-350 Vertical Machining Centre
- Table 650 × 350 mm
- Travel 400 / 350 / 320 mm
- Taper 7 / 24 No. 40
No machines match these filters. Tell us what you need and we will find one.
Find a similar machine
Only your name and phone are required. Add your part details for a better answer.
What happens next
- We confirm the detailsPrice, availability, configuration and location.
- You see the machineVideo, visit or test cut for used machines; configuration review for new.
- Delivery and start-upTransport, installation, commissioning and training.