Skip to content
New & used CNC machines · Chennai · supplied across India

CNC turning

CNC turning centres & lathes

CNC lathes, slant-bed turning centres, chuckers, turn-mill centres with Y axis and sub-spindle, sliding head automats and automated turning cells – new and used, with clear specifications and help choosing the right chuck size and bar capacity.

  • Chuck 135 – 450 mm
  • Bar work & chucking
  • Live tools, Y axis, sub-spindle
ACE Micromatic CNC lathe

Choose by part

Which turning machine fits your work?

All turning machines

Lathes and turning centres available

Sizing a CNC lathe: what to check

SpecificationWhat to check
Chuck sizeHolds your largest diameter securely; bigger chucks reduce maximum speed.
Max. turning diameter and lengthYour largest part with room for the tools; tailstock for long shafts.
Bar capacitySpindle bore for bar work with a bar feeder.
Spindle speed and powerEnough surface speed for small diameters and torque for large ones.
Turret and live toolsStations for all tools; live tools and Y axis if the part needs milling or cross holes.

FAQs

Frequently asked questions

What is the difference between a CNC lathe and a turning centre?

In everyday use the terms overlap. "Turning centre" usually means a slant-bed CNC lathe with a turret, often with extras such as live tools, C axis or bar feeding, while "CNC lathe" can also mean a simpler flat-bed machine.

Do I need a Y axis or live tools?

Only if the part needs milling, off-centre drilling or tapping. With live tools and Y axis the part comes off finished, saving a second operation on a VMC.

Which chuck size should I choose?

Choose a chuck that grips your largest diameter comfortably. Most small and medium parts run on 165–250 mm chucks; larger flanges need 300 mm and above.

What is a sliding head automat used for?

For small, long and slender parts – pins, shafts, connectors, medical and electronic parts – usually turned from bar in high volumes. The guide bush supports the bar close to the tool, so long parts stay accurate.

Do you have used CNC lathes?

Yes – used listings include ACE Micromatic Jobber and LT-series lathes, a Jyoti DX 200 and others. See the used machines page or ask for current stock.

Send us your part – we will size the lathe

Largest diameter and length, material, tolerance and quantity are enough to start.